At the testbeam we took data both in standalone mode and combined with the test of the testbeam DAQ system.
These runs are all stored in CASTOR with filenames
of the form
/castor/cern.ch/atlas/testbeam/combined/2004/daq_SFI-51_combined_RRRRRRR.fileNN.data
where RRRRRRR is the run number and NN is a sequence
number of the file within the run, typically 01, 02, etc.
Note that more full (and official) information about combiend test beam data can be found through the AMI database. For details of how to search this and for other lists of runs and files, see Jürgens web page.
In many of the following runs the L1Calo system missed a few events. Detailed information about this may be found in this mail from Steve.
| Run Number |
N. Events |
Files | Beam/ Calib |
Eta (det) |
Phi (det) |
Systems Readout |
Trigger | Quality | Comments |
|---|---|---|---|---|---|---|---|---|---|
| 2101558 | ? | 01 | pi -350 | -0.35 | ? | L1Calo+Lar+Tile? | Beam | OK? | |
| 2101563 | ? | 01-04 | pi -350 | -0.45 | ? | L1Calo+Lar+Tile? | Beam | OK? | |
| 2101564 | ? | 01-04 | pi -350 | -0.55 | ? | L1Calo+Lar+Tile? | Beam | OK? | |
| 2101565 | ? | 01-04 | pi -350 | -0.65 | ? | L1Calo+Lar+Tile? | Beam | OK? | |
| 2101566 | ? | 01-04 | pi -350 | -0.25 | ? | L1Calo+Lar+Tile? | Beam | OK? | |
| 2101662 | ? | 01-05 | p +350 | -0.65? | ? | L1Calo+Lar+Tile | ? | OK? | |
| 2101663 | ? | 01-04 | p +350 | -0.65? | ? | L1Calo+Lar+Tile | ? | OK? | CTP was sent all our triggers |
| 2101664 | ? | 01-02 | p +350 | -0.65? | ? | L1Calo+Lar+Tile | ? | OK? | CTP was sent only Esum>50GeV |
| 2101665 | ? | 01-02 | p +350 | -0.65? | ? | L1Calo+Lar+Tile | ? | Bad? | CTP was sent only Esum>150GeV No LAr data?? |
| 2101666 | ? | 01-02 | p +350 | -0.65? | ? | L1Calo+Lar+Tile | ? | OK? | CTP was sent only e clusters |
| 2101668 | ? | 01 | p +350 | -0.65? | ? | L1Calo+Lar+Tile | ? | OK? | CTP was sent only jets |
| 2101670 | ? | 01-02 | p +350 | -0.65? | ? | L1Calo+Lar+Tile | ? | OK? | CTP was sent all our triggers |
| 2101727 | ? | 01-10 | e -180 | -0.55 | ? | L1Calo+Lar+Tile?? | Beam | OK? | |
| 2101728 | ? | 01-06 | e -180 | -0.50 | ? | L1Calo+Lar+Tile?? | Beam | OK? | |
| 2101729 | ? | 01-06 | e -180 | -0.50 | ? | L1Calo+Lar+Tile?? | Beam | OK? | |
| 2101813 | ? | 01 | pi +180 | -0.5 | ? | Almost all? | CTP | Its all we have! |
CTP was sent all our trigger bits. LAr data late by 1 tick. L1Calo CMM&RoI data mistimed or missing. Various cabling errors. |
| 2101814 | ? | 01 | ? | ? | ? | Almost all? | CTP | Its all we have! |
(As 2101813) |
| 2101815 | ? | 01 | ? | ? | ? | Almost all? | CTP | Its all we have! |
(As 2101813) |
| 2101816 | ~50k? | 01-05 | ? | ? | ? | All except TRT | CTP | Its all we have! |
(As 2101813) |
NB the CP chip firmware had the following thresholds "hard coded": 20, 50, 100, 200, 255, 255, 255, 255. (For all the above runs?).
These runs were written locally to our SFI machine
pctb-lar-sfi01 (only accessible via firewall from lxplus)
with filenames like
/data/l1calo/standalone/daq_SFI-111_COMMENT_RRRRRRR_fileNN.data
where COMMENT was (sometimes) used to identify the type
of data, RRRRRRR is the run number and NN the file sequence
number.
All completed files (ending in .data, not .writing) over 1Mbytes
have now been copied to CASTOR with filenames of the form
/castor/cern.ch/user/l/landon/atlas/l1calo/tb2004/daq_SFI-111_COMMENT_RRRRRRR.fileNN.data.
I will only add a table of these standalone runs if someone tells me that would be useful. They may be described in the scanned logbook pages available via the testbeam web page at RAL