Next: Software Options
Up: dig_0917_req
Previous: Final System
Types of Calibration
- Typical procedure: run, stop, analyse, change parameter, iterate
- Standalone setup procedures (internal timing, cabling)
- Input signal cabling, timing, BCID parameters
- Energy calibration (pulser, particles)
- Trigger processor performance
Requirements
- Use one or more LAr and/or TileCal partition
- Control LAr/TileCal calibration systems (maybe both)
- BUSY network, TTCvi, local trigger, etc
- In some cases, readout of single ROD/processor crate is enough
- In many cases, readout of multiple crates is required
Murrough Landon (m.p.j.landon@qmw.ac.uk)